LE-470

• Auto Exposure-This patented feature automatically selects the correct exposure fora wide dynamic range of illumination. The exposure setting can be photometrically weighted to the full scene,the center of the scene, or to the brightest points of light within the scene.
• Remote camera controller-A very easy to use camera controller allows operation of allcamera functions up to 30 feet away from the camera's remote head.
• High Light Sensitivity-The LE-470 uses a Hyper-HAD sensor which has light focusing lenseson each pixel to maximize the CCD's sensitivity
• Multiple Video Outputs-Multiple outputs allow simultaneous uses of S-VHS recorders, NTSCmonitors, and black and white frame grabbers.
• Excellent Image Quality-The four color mosaic CCD filter produces accurate color and 470TV lines of horizontal resolution.

Specifications

• Image Device- One 1/2" Interline Transfer "Hyper HAD" CCD Four color mosaic filter
• Picture Elements-
• NTSC: 768 (h) x 494 (v)
• PAL: 752 (h) x 582 (v)
• Sensing Area- 6.4mm x 4.8mm
• Pixel Size-
• NTSC: 8.4um x 9.8um
• PAL: 8.6um x 8.3um
• Signal System-
• NTSC Color; RS-170A monochrome
• PAL Color; CCIR standards
• Scanning System- 2:1 interlace, 525 lines (NTSC)
• Horizontal Frequency-
• NTSC: 15.734 kHz
• PAL: 15.625
• Sync System- Internal
• Resolution- 470 TV lines
• Minimum Illumination- 2 lux at f1.2, 30 IRE output, +12dB gain
• Lens Mount- C-mount
• Auto Exposure- ON: AUTO, AUTO+, AUTO- (Patented microprocessor controller, continuous ratchet algorithm.Maximum repsonce time: 0.5 seconds, range 2-25,800 lux)
• Electronic Shutter Manual- 1/60++, 1/60+, 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10,000 (seconds)
• Signal to Noise Ratio- 55dB, 50 IRE output 0dB gain
• Scene Weighting- Full screen, center and peak mode
• Inputs/Outputs-
• Y/C out: S-Video 4 pin
• Color out:BNC type (NTSC)
• B/W out: BNC type (RS-170A monochrome)
• Remote Head in: Card-edge
• White Balance- Auto (2000K to 6500K)
• Operating Temperature- 32 degrees F - 130 degrees F
• Power Requirements- 100 to 240 VAC, 50-60 Hz; 15 watts consumption
• Memory- Non-volatile RAM. Retains White Balance, Exposure, and Scene Weighting
• Supplied Accessories- Power cord (6ft. 90-250 VAC), Y/C cable (6ft.), Operator's manual
• Remote Camera Head-
• weight: 1.8oz
• dimensions: 1.75in. x 1.25in.
• Camera Cable- 10ft., 20ft. extension cable available
• Processor-
• weight: 9lbs.
• dimensions: 12in. x 11.4in. x 2.5in.
• Regulatory Compliance- Designed to meet IEC 601.1 Type 1, Class B and UL-544; Meets FCC, VDE limit B