LX-450A

Micro-Sensitizer Remote-Head camera contains a hypersensitive CCD andtwo integral adapting optical systems to enhance incoming light, therefore the camera reproducestrue color for flourescent imaging with light levels as low as 0.5 LUX.	RGB, Y/C, 9 Pin D-sub and RS170A Outputs All connectors arelocated on the rear panel to allow simultaneous connection to S-VHS or NTSC composite video recorders, RGBmonitors, video printers, and a B/W or color image capture board.
Auto Exposure A microprocessor selects the precise exposure timein less than 0.5 seconds for all specimen image conditions. Video image glare is avoided when switching fromDarkfield to Brightfield. There is no need to reset the microscope illumination when changing from 100x to 5x objectives.	Keyboard Full size computer-style keyboard functions as a VideoCharacter Generator, allowing on-screen recording of titles (up to 96 alpha numeric characters), time/date, and elapsed time. The keyboard controls and displays all camera functions. Recorded and printed imagesare easily identifiable with appropriate labeling.

Specifications

• Image Device- One 1/2" Interline Transfer HyperHAD CCD. Complimentary Color Mosaic Filter.
• Picture Elements-
• NTSC: 768 (h) x 494 (v)
• PAL: 752 (h) x 582 (v)
• Sensing Area- 6.4mm x 4.8mm
• Pixel Size-
• NTSC: 8.4um x 9.8um
• PAL: 8.6um x 8.3um
• Optics- Integral adapting optics emulates 2/3" CCD field of view.
• Signal System- EIA Standards: NTSC Color; RS-170A Monochrome
• Scanning System- 2:1 interlace, 525 lines (NTSC)
• Horizontal Frequency-15.734 kHz (NTSC)
• Sync System- Internal or External with composite video or with VD and HD
• Resolution- 470 TV lines
• Minimum Illumination- .05 lux at f1.2, 30 IRE output, +12dB gain
• Lens Mount- C-mount with parfocal adjustment
• Auto Exposure- ON: AUTO, AUTO+, AUTO- (Patented microprocessor controller, Proprietary Continuous Ratchet Algorithm [Pat. pending];Maximum repsonce time: 0.5 seconds, range 0.5-32,760 lux)
• Electronic Shutter Manual- 1/60++, 1/60+, 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000,1/10,000 (seconds)
• Signal to Noise Ratio- 51dB, 50 IRE output 0dB gain
• Inputs/Outputs-

Connection	Type
R/G/B Out	BNC (x3)
Sync Out	BNC
Y/C Out	S-Video 4-pin
Color Out	BNC (NTSC)
B/W Out	BNC (RS170A mono)
GENLOCK Out	BNC
9 Pin Out	D-sub TARGA protocol
Remote-Head In	9-pin DIM Lemo
Keyboard In	5-pin DIN

• White Balance- Preset (3200 degree K); Auto (2000 degree K to 6500 degree K)
• Operating Temperature- 14 degrees F - 130 degrees F
• Vibration and Shock- Meets MIL-E 5400T standards
• Power Requirements- 90 to 260 VAC, 50-60 Hz; 15 watts consumption
• Memory- Non-volatile RAM. Retains White Balance, Exposure Mode and Setting, and Time/Date
• Supplied Accessories- Power cord (6ft. 90-250 VAC), Y/C cable (6ft.), BNC cable (6ft), RGB Sync cable assembly (6ft), computer keyboard, Operator's manual
• Color Bar Generator- SMPTE Color Bar Pattern
• Remote Camera Head-
• weight: 3.6oz
• dimensions: 1.75in. x 1.87in.
• Camera Cable- 10ft., 20ft. extension cable available
• Processor-
• weight: 9lbs.
• dimensions: 12in. x 11.4in. x 2.5in.
• Regulatory Compliance- Designed to meet IEC 601.1 Type 1, Class B and UL-544; Meets FCC, VDE limit B